Digital Patch 3D (Raised & Textured Print)

Plotterfilms DIGITAL Patch 3D is a digital printing foam material suitable for solvent, eco-solvent and latex machines. Give your applications orginality and uniqueness thanks to technology developed by Plotterfilms. The 750-micron thickness gives this material a soft three-dimensional effect, even after the heat-press. 

Application

Time: 15 seconds
Temperature: 160˚C
Pressure:Medium / 50-60psi / 4bar / #5-6 on Hotronix
Peel: Hot (Immediate)

Time, temperatures and pressures are provided as a recommendation for a majority of applications. Given the nature heat application, diversity of heat presses available and various fabric compositions, optimal heat application settings may vary from these recommendations.

Fabrics

Compatible with the following fabrics:

• Cotton
• Polyester
• Nylon

This product has also been used on a wide variety of fabrics but testing is recommend to guarantee results.

Availability

• 0.5m x 5m roll
• 0.5m x 20m roll

Specifications

Thickness: 750µm
Minimum recommended cut size: 20mm Text (for fast weeding)
Composition: 100% Polyurethane (PU)

Technical Data Sheet

For instructions on how to use this product including recommended settings for printing, cutting and heat application. Click the link below:

Technical Data Sheet