Add height to your designs with our Gel 3D effect vinyl. Despite its thickness, it is easy to weed and apply. Gel vinyl adds texture resulting in a badge like transfer. A great alternative to single colour embroidery, add the Gel vinyl to the front of a cap, bag, garment etc. to add another level to your transfer.
- Static carrier for easy weeding
- Best results with 60 degree blade
- Perfect for the front of caps/hats
Application
Time: 5 seconds front + 20 seconds inside out
Temperature: 150˚C
Pressure: Medium / 50-60psi / 4bar / 5-6 on Hotronix
Peel: Warm
Fabrics
Compatible with the following fabrics:
- Cotton
- Polyester
- Cotton/Polyester Blends
This product has also been used on a wide variety of fabrics but testing is recommend to guarantee results.
Specifications
Thickness: 750µm
Material Composition: 100% Polyurethane (PU)
Minimum Cut Size: 15mm Text (For fast weeding)
Finish: Matte
Recommended Blade: 60˚
Availability
- 0.50m x by the metre
- 0.50m x 20m rolls
Technical Data Sheet
For instructions on how to use this product including recommended settings for printing, cutting and heat application. Click the link below:
See Full Vinyl Range - Download the Velflex Product Guide